Power Management
Access Power Management Screens:
Power Management screens are accessed from your iOS device:
• Press the “Settings Menu” button on the R/H bottom corner of the Main screen to take you to the Settings screen.
• Press the “Power Management” button on the “Spa Settings” tool bar to take you to the Power Management screen.
The Power Management screen is used to:
1. Program Spa functions, Heater, Filter and Ozone can or cannot operate during Peak and Mid-Peak times:
Off = Function will not operate during Peak or Mid-Peak.
On = Function will operate during Peak or Mid-Peak.
2. Program which days of the week Power Management controls the Heater, Filter and Peak II Ozone functions during Peak and Mid-Peak times:
Off = Power management is disabled, Heater, Filter and Ozone will function as programed in the Low Level Settings.
On = Power Management is enabled, and will control Heater, Filter and Ozone functions as programed for Peak and Mid-Peak times.
3. Access the Peak Management screen. To access the “Peak Management” screen press the “Peak Hours” button on the top of the Power Management screen.
The Peak Management screen is used to set the Off-Peak, Mid Peak and Peak power start and stop time settings in line with your local power suppliers Off-Peak, Mid-Peak and Peak power time charges.
The start and stop times of the Peak, Mid-Peak and Off-Peak hour settings can be programed by dragging the start and stop lines on the clock with your finger.
Once you have finished programming all the settings, press the “Save” button in the top left of the menu to save your Peak Management settings and return to the Power Management screen.
Press the “save” button in the top left of the menu to save your Power Management” settings and return to the “Settings” screen. The programmed Power Management settings are now active.
Press the “Done” button to return to the Main Screen.
Main Screen:
When the spa is in economy mode and the heater has been disabled for Peak or Mid Peak times, the “Economy Mode” status is displayed on the Main screen under the temperature.