The water care section will help you set up your ideal filtration and heating settings. Choose a mode depending on your need.

Use the Light button to choose your setting. A check mark will appear on the selected icon to confirm. In Economy Mode, the set point will be reduced by 20F which means that the heating system not be engaged unless the temperature falls to 20F below the spas set temperature.
Use the arrow up/down buttons to select mode.

Water Care Modes:

Away; In this mode the Spa will always be in economy; the set point will be reduced by 20F.

Standard * You have to be in 'Standard' Mode to set Filtration; The Spa will never be in economy mode and will be filtering according to the pack’s low level configuration.

Super Energy (Economy Mode); The Spa will be in economy mode from Monday to Friday and resume normal mode on the weekend.

Weekender (Economy Mode); The Spa will be in economy mode from Monday to Friday, and will run normally on the weekend.

Select next to set the filtration.

Processor Card Replacement